        #
        | README file for
        |
        | ELSA Wireless LAN products/accessories
	|
        |       ELSA AirLancer MC-2 Driver & Firmware Upload
	|
        | Copyright (c) 2001 ELSA AG, Aachen (Germany)
        |
        | ELSA AG makes no representation or warranties for software
        | not developed or manufactured by ELSA and which is sold
        | under any name other than ELSA, especially with regard to
        | shareware and other third-party software. This applies in
        | particular to the "Year-2000 compatibility" of the software.
        |
        | ELSA AG                   Internet   : http://www.elsa.de
        | Sonnenweg 11              
        | D-52070 Aachen            
	| Germany
        |
	| ELSA Inc.		    Internet   : http://www.elsa.com
	| 1630 Zanker Road
	| San Jose, CA 95112
	| USA
        |
        | ELSA Asia Inc.            Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec.5    
        | Nanking East Road
        | Taipei 105
        | Taiwan
        |
        | ELSA Japan Inc.           Internet   : http://www.elsa.com
        | Mita Suzuki Building 3F   
        | 5-20-14 Shiba, Minato-ku
        | Tokyo 108-0014
        | Japan
        |
        | 03/07/2001, OSchilpe


        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        
--------------------------------------------------------------------
1.      Overview

	This .zip file contains software to update AirLancer MC-2 
	under Windows NT 4.0.

--------------------------------------------------------------------

2.	Contents

	The file contains the following folders:

	LIESMICH.TXT	this file in german
	README.TXT	this file

	FIRMWARE.206\	contains card-firmware 2.06 as 
			.bin-file and as upload file for
			updating the card via an 
			ELSA Wireless Access Point.

	Update.nt\	Update-tool for updating
			the card using a laptop/pc.

	Driver.nt\	Driver for Windows NT 4.0, Version 2.07

--------------------------------------------------------------------

3. 	Installation

3.1.	Installation of the drivers for Windows NT 4.0.

	Plug the updated AirLancer MC-2 into your laptop or pc 
	(equipped with an ISA adapter) running under Windows NT 4.0.
	During the plug&play hardware installation insert the path to 
	OEMSETUP.inf in folder DRIVER.nt .
	
	Details to the installation under Windows NT 4.0 can be found
	in the AirLancer manual.
	

3.2.	Uploading the card-firmware
	
	
	Now, flash the firmware Into you AirLancer MC-2.
	
	AirLancer MC-2 must be plugged into the laptop and being 
	cativated.
	Then start the file WLU.exe from the folder UPDATE.nt
	Klick on 'update'.
	Insert the path to the file FIRMWARE206.bin in folder
	FIRMWARE.206 .
	The tool now uploads the firmware into the card.
	
	Afterwards, Airlancer MC-2 is ready for running under 
	Windows NT 4.0.
		



--------------------------------------------------------------------


